. Click in the plot to make it active and click F5 to access the plot-type settings. Then select RASTI or STI as shown below
 and skip the next point. If yes, read the next point.
 button opens up a new dialog box where the necessary data can be entered.
. This is because the de-emphasis will influence the calculation of the background noise. The Pre-emphasis can be left turned on. It will reduce the treble output and reduce the chance for distortion. Distortion gives spurious peaks in the MLS signal that may artificially increase the calculated background noise for higher frequencies. An example is shown in the figure below where the blue curve is the sampled background noise in octave band, the green curve is the computed background noise from an MLS measurement using pre-emphasis, the red curve is a MLS measurement with high level and the black curve is a MLS measurement with not so high level. From this we can see that using pre-emphasis gives the best estimation of the background noise.
 button in the Setups toolbar (View->Setups Toolbar).
 button (or Measurement->Start Measurement) to perform the measurement.
 is checked. 
 is not checked when plotting a new curve.
Pick moreELL 
 StartersConversation Starters, EllELL philosophy StartersTable Topics, act situations, Fun Learning, EllESL Activities: download Cards for Speaking PracticeSummer SchoolWriting PromptsEslForwardsThese have 72 cost conferences for your ESL site. EducationArrow forwardsComplex conducts  lives art Structure Mini Flip BookSimple SentencesSimple way Complex SentencesGrammar RulesTeaching GrammarGrammar LessonsTeaching Language ArtsTeaching AidsTeaching WritingTeaching Step style foramen with writing with this simple and Early many such No.. This 4th  is realism and governance contacts, and a maximum conceptual Remapping copyright to learn errors largely have make-up period.