Go to File->Open... and select the files you want to batch process.Shown below, we have marked seven files that are to be batch processed.
To mark several measurements, hold the <Ctrl> key while clicking on the measurements that are to be inserted. <Shift> can also be
Note: The files you want to batch-process have to be in the same folder.
If you only want to export the curves that are plotted (e.g.
reverberation time), click the button to peform the calculation and use File->Export
Data... to export the data. Before you do this, make sure that
Plot->Overlay is checked. If not, the old curves will be erased when
plotting a new curve
A more powerful method will now be explained.
Click the button shown above to open the dialog box shown below (this
dialog can also be opened from Measurement->Measurement Tasks...).
Make sure is checked. Then the selected parameters (in the figure above
Reverb times are selected) are being computed and displayed to a table,
printer or file(s) dependent on the settings in Calculate->Options....
If you have selected to send result to a text-file as shown below, text-files
will be generated with the same name as the measurement files you have opened
and they will be put in the same folder.
Note that the plotting will reduce the speed. But you can turn off the plotting as shown in the figure below
If you are batch-processing many files, you should also make sure that the measurements are deleted from memory after the parameters are computed. This is done as shown below