Install the VXpocket

Insert the VXpocket card in one of the PCMCIA slots on your laptop. Attach the cables.

Important Point Number 1! Fasten the cables to the parallel port with the two screws that comes with the sound card as shown in the figure below. You may alternatively connect to the com port or screen output connector. This will make it more difficult to break the connection.

Important Point Number 2! If a Found New Hardware wizard is displayed, just click the Cancel button to exit. It will not be used to install the driver.

Use the following instructions to install the sound card drivers. If you have received a CD from us, the driver should be found on this CD. If you don’t have a CD, download the latest drivers from www.digigram.com. It is not recommended to use older drivers.

Run the driver file and follow the installation instructions using default settings.