 |
|
For more info and for downloading the measurement files, contact support@winmls.com.
Note that the sine sweep method in the software was in an early beta version, because of this we have to be careful when analyzing the data.
Go to Setups->Load... and load the setup named Room Acoustics_ReverberationTime.
Go to File->Open... and open the file named SineSweepHighLevelCut.wav.
The impulse response will be plotted on a dB axis in the lower plot.
Go to Calculate->ISO 3382..., if the calculation options dialog is displayed, then select the settings as shown below
Setting manual start of impulse response
Contents
Index
Search
Previous
Next
to
exit the dialog box.