 |
|
Refer to the help in the dialog boxes for additional information.
How to measure room acoustics?
How are room acoustics parameters presented?
How to set manual start of the impulse response?
How can the Room Acoustics Parameters Grid be copied to a spreadsheet (e.g., Excel)?
How to fix problems with the formatting when pasting room acoustics parameters to Excel?
How to fix problems with the formatting when reading a room acoustics parameters text-file to Excel?
Is the relationship between T30 and T60 linear, so that T60=2*T30?
Strength ISO 3382 Calibration Procedure
How to detect echoes from a measured impulse response?
How to specify two measurements for computing room acoustics parameters?
How to change the bandwidth, e.g. obtain the reverberation time of the broadband measurement?
How to filter and display the time data (impulse response) for a given frequency?
Batch processing: How to automatically compute room acoustics parameters from several measurements?
How to average room acoustics parameters obtained from several measurements?
Is there a way of automatically sending measurement channel two to the lower plot?
How to change the horizontal axis of the Room Acoustics Parameters plot type?
How is the criterion in the automatic detection of the initial time delay of the impulse response?
Contents
Index
Search
Previous
Next